Thermaly
3D heat transfer simulation
About
Thermaly is a heat propagation simulation, Originally designed for concrete piles, but may be used for other purposes.
Thermaly is
-
Using a plain English prompt
-
Using the finite differences method
-
Blazing Fast - uses all the processor resources at 100%, GPU in some cases
-
Verified against both analytical solutions and a direct calculation method
-
Produces 3D view, heat maps, and charts​​
-
Community sharing, contribute your simulation so that others can use it
​
Example:
Enter this prompt:
A bored concrete pile, 1m diameter and 12m long, in saturated sand. Sensors at 0.5m spacing down the rebar cage, 2" from the edge. Put a 20cm tall, full-width disc of saturated soil cutting right across the pile vertically centered exactly between the 12th and 13th sensors. Run 21 hours and show a vertical section, and a chart of temperature vs depth at the sensors.
To get this:​​
Now, just click GO to get this:
License:
The owner permits you to use the software as-is for non-commercial use as long as the PILETEST name and logo are displayed on the first page of any article or published paper.
Changes or reverse engineering are not allowed.
Liability:
The owner takes no responsibility for any conclusions made about the results of the software.
​​​Support/suggestions/downloads/examples, etc:
Contact erezam@piletest.com​
The first thing you will see after running Thermally is a request to enter your Google API Keys. This is a 2-minute free step. Do not let it scare you. It is really simple